Part Number Hot Search : 
DTC363ES BC850BT MMBD4 85230 MAX1760 C7001 CCVGA7C5 UF284OG
Product Description
Full Text Search
 

To Download RID-65 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 65W Dual Output Switching Power Supply
Features :
RID-65
series
Isolated output & GND for CH1,CH2 Universal AC input / Full range Protections:Short circuit/Over load/Over voltage Cooling by free air convection LED indicator for power on 100% full load burn-in test All using 105
long life electrolytic capacitors
Withstand 300VAC surge input for 5 second High operating temperature up to 70 Withstand 5G vibration test High efficiency, long life and high reliability 3 years warranty
SPECIFICATION
MODEL OUTPUT NUMBER DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE RID-65A CH1 5V 6A
Note.6 0.3 ~ 8A Note.6 66W
RID-65B CH2 12V 3A 0.2 ~ 4A 120mVp-p 8.0% 1.5% 5.0% 1200ms, 30ms/115VAC at full load 12ms/115VAC at full load 125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage) 82% CH1 5V 4A 0.3 ~ 8A 68W 80mVp-p CH1: 4.75 ~ 5.5V 2.0% 0.5% 0.5% 150mVp-p 10% 2.0% 5.0% CH2 24V 2A 0.2 ~ 3A
RIPPLE & NOISE (max.) Note.2 80mVp-p CH1: 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 2.0% LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY(Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVER LOAD
Note.4 Note.5
0.5% 0.5% 500ms, 20ms/230VAC 50ms/230VAC 88 ~ 264VAC 47 ~ 63Hz 81% 2A/115VAC 1.2A/230VAC COLD START 40A/230VAC <2mA / 240VAC 110 ~ 150% rated output power
INPUT
PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE
Protection type : Hiccup mode, recovers automatically after fault condition is removed CH1: 5.75 ~ 6.75V Protection type : Hiccup mode, recovers automatically after fault condition is removed -25 ~ +70 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 )on +5V output 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B EMC
(Note 7)
HARMONIC CURRENT EMS IMMUNITY MTBF
Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-6-2 (EN50082-2) heavy industry level, criteria A 265.9Khrs min. MIL-HDBK-217F (25 129*98*38mm (L*W*H) 0.44Kg; 30pcs/14.2Kg/0.72CUFT )
OTHERS
DIMENSION PACKING
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load. 6. Each output can work within current range. But total output power can't exceed rated output power. 7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
File Name:RID-65-SPEC 2006-08-01
65W Dual Output Switching Power Supply
Mechanical Specification
4.5 122.5
RID-65
Case No. 903
series
Unit:mm
1
9.5
2 3 4 5
2-
M
3
33
31
3 .5 8 5 .5 9 .5 3 .5
7
8.2
6 7
3 .5
4.5 73.5 129
6.5
120
9
1 8 .5
32
77
Terminal Pin. No Assignment
Pin No. 1 2 3 4 Assignment AC/L AC/N FG DC OUTPUT G2 Pin No. Assignment 5 DC OUTPUT +V2 6 DC OUTPUT G1 7 DC OUTPUT +V1
Derating Curve
Output Derating VS Input Voltage
Ta=25
100
100 90
80
80
60
70
LOAD (%)
LOAD (%)
40
60 50 40
20
-25 -25
0 0
10
20
30
40
50
60
70 (VERTICAL)
88
95
100
115
120
140
28.5
160
3 -M
3
18
38
180 200
98
AMBIENT TEMPERATURE ( )
3 .5
220
240
264
INPUT VOLTAGE (VAC) 60Hz
File Name:RID-65-SPEC 2006-08-01


▲Up To Search▲   

 
Price & Availability of RID-65

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X